{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Re-adjustable hand reamer 7 mm
Article no.: 160500 7
Article code:
- Tool material: HSS
- Standard: DIN 859
- Helix angle: 7-8
- Application for type of drilling: for through hole
Product details
Technical Data
| Nominal ⌀ DC | 7 mm | |
| Tool material | HSS | |
| Standard | DIN 859 | |
| Helix angle | 7-8 degrees | |
| Application for type of drilling | for through hole | |
| Flute length Lc | 38 mm | |
| Overhang L1 | 66 mm | |
| Overall length L | 107 mm | |
| Shank square □ | 5.6 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 160500 7 | |
| EAN / GTIN | 4045197250636 | |
| Manufacturer number | 160500 7 |
Application Table
N
P
P
P
Description
Version:
Up to 5 mm with straight flutes; from 6 mm with left hand helix 7 − 8°. The reamer body is slit and can be adjusted by approx. 1/100 of the reamer ⌀ using the expansion screw (e.g. 20 mm ⌀ = 0.2 mm).
Application:
For opening through holes to a slight oversize. Use the straight fluted reamers only in holes which are not interrupted. Make sure that the screw is not left tightened when stored.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Re-adjustable hand reamer 7 mm
on request
Available in 6-8 weeks
0 pieces in stock
US $ 116.99
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 3-4 weeks
0 pieces in stock
US $ 65.21
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 3-4 weeks
0 pieces in stock
US $ 117.87
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 4-6 weeks
0 pieces in stock
US $ 48.06
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overhang L1 | 66 | 72 | 81 | 69 |
| Overall length L | 107 | 109 | 150 | 107 |
| Nominal ⌀ DC | 7 | 7 | 7 | 7 |
| Standard | DIN 859 | Manufacturer’s standard | DIN 208 B | DIN 206 B |
| Flute length Lc | 38 | 31 | 31 | 54 |
| Tool material | HSS | HSS E | HSS E | HSS |
| Application for type of drilling | for through hole | for through holes | for through hole | for through holes |