{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Power Q Mini high feed rate indexable milling cutter 66/8 mm
Article no.: 213058 66/8
Article code:
- Milling application: Circular milling; Circular milling; Plunging
- Through-coolant: yes
- Machining strategy: HPC
- Tool exchange: PowerCard
Product details
Technical Data
| Series | Power Q | |
| Cutting edge ⌀ DC | 66 mm | |
| Number of cutting edges Z | 8 | |
| Shank type | with bore | |
| Milling application | Circular milling; Circular milling; Plunging | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Tool exchange | PowerCard | |
| ⌀ D3 | 60 mm | |
| Overall length Ltot | 40 mm | |
| Mounting bore ⌀ | 22 mm | |
| Circular interpolation milling ⌀ Dmin | 126 mm | |
| Circular interpolation milling ⌀ Dmax | 130 mm | |
| Circular interpolation milling ap | 1 mm | |
| Ramping angle αmax | 0.34 degrees | |
| Ramping length L for αmax | 58.4 mm | |
| suitable indexable insert | ANGX10T308ZE.R | |
| Setting angle κ | 20 degrees | |
| Fz Helix | 0.8 | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 213058 66/8 | |
| EAN / GTIN | 4062406566784 | |
| Manufacturer number | 213058 66/8 |
Description
Version:
High feed rate milling system for smaller machining diameters and greater operating depths. Particularly effective due to the large number of cutting edges.
Spare part:
Pack of insert screws No. 219799 9 (7IP; 1.2Nm).
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
GARANT Power Q Mini high feed rate indexable milling cutter 66/8 mm
on request
In stock
20 pieces in stock
US $ 612.58
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
5 pieces in stock
US $ 532.83
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 8 | 8 |
| Mounting bore ⌀ | 22 | 27 |
| Milling application | Circular milling ;Circular milling ;Plunging | End milling ;Ramping ;End milling |
| Through-coolant | yes | yes |
| Shank type | with bore | with bore |
| Cutting edge ⌀ DC | 66 | 66 |
| Machining strategy | HPC | HPC |