{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Diabolo solid carbide copy slot drill, TiAlN, ⌀ Dc × L1: 0,1X0,3mm
Article no.: 207373 0,1X0,3
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: H
- Tolerance nominal ⌀: 0 / −0,005
- No. of teeth Z: 2
Product details
Technical Data
| Series | Diabolo | |
| Cutting edge ⌀ DC | 0.1 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | H | |
| Tolerance nominal ⌀ | 0 / −0,005 | |
| No. of teeth Z | 2 | |
| Helix angle | 25 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.05×D for copy milling | |
| Shank | DIN 6535 HA to h5 | |
| Through-coolant | no | |
| Flute length Lc | 0.08 mm | |
| Corner radius R1 | 0.05 mm | |
| Overhang length L1 incl. recess | 0.3 mm | |
| Recess ⌀ D1 | 0.08 mm | |
| Overall length L | 45 mm | |
| Shank ⌀ Ds | 4 mm | |
| Feed fz for copy milling in steel < 65 HRC | 0.009 mm | |
| Correction factor ap corr | 1 | |
| Colour ring | red | |
| Type of product | Ball-nosed slot drill |
Identification numbers & Classifications
| Article number | 207373 0,1X0,3 | |
| EAN / GTIN | 4045197932129 | |
| Manufacturer number | 207373 0,1X0,3 |
Application Table
P
200
P
200
P
190
P
170
H
120
H
100
H
72
H
55
H
50
H
45
M
90
M
80
N
140
Description
Version:
GARANT Diabolo:
Special geometry, coating and carbide for hard machining in the high-performance field. Suitable even for machining electrolytic copper.
Tolerances:
Recess angle α = 16°.
Special geometry, coating and carbide for hard machining in the high-performance field. Suitable even for machining electrolytic copper.
Tolerances:
- Corner radius: Radius contour = 0 / -0.005 mm.
- Neck ⌀: D1 = 0 / -0.01 mm.
Recess angle α = 16°.
Note:
At greater tool overhang lengths, use a reduced value for ap!
values for:
copying: ap = 0.05×D×ap korr
To calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)! e.g: vf = 18000 [rpm]× fz [mm/Z]× z
values for:
copying: ap = 0.05×D×ap korr
To calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)! e.g: vf = 18000 [rpm]× fz [mm/Z]× z