{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Alu solid carbide milling cutter with more chip separators TPC, DLC, ⌀ h6 DC: 12mm
Article no.: 203113 12
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: W
- Tolerance nominal ⌀: h6
- No. of teeth Z: 4
Product details
Technical Data
| Series | Master Alu | |
| Cutting edge ⌀ DC | 12 mm | |
| Coating | DLC | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | W | |
| Tolerance nominal ⌀ | h6 | |
| No. of teeth Z | 4 | |
| Helix angle | 38 degrees | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal and oblique | |
| Cutting width ae for milling operation | 0.15×D | |
| Shank | DIN 6535 HB to h6 | |
| Balance quality with shank | G 2.5 with HB | |
| Through-coolant | no | |
| Machining strategy | TPC | |
| Flute length Lc | 36 mm | |
| Overhang length L1 incl. recess | 45 mm | |
| Recess ⌀ D1 | 11 mm | |
| Overall length L | 93 mm | |
| Shank ⌀ Ds | 12 mm | |
| Shank form | HB | |
| Corner rounding rv | 0.1 mm | |
| Average chip thickness hmax for TPC milling in short-chipping aluminium | 0.086 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification & Classification
| Article number | 203113 12 | |
| EAN / GTIN | 4062406245788 | |
| Manufacturer number | 203113 12 | |
| Manufacturer | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
550
N
500
N
450
N
200
N
160
N
200
N
150
N
130
N
180
N
160
N
150
N
130
N
160
N
300
N
160
N
200
Description
Version:
Specially designed for TPC high-performance milling. Optimised bending strength due to the use of ultra-fine grain substrates. 1×D chip separator for controlled chip breaking.
Balanced for very high process reliability and protecting the machine at high speeds.
Balanced for very high process reliability and protecting the machine at high speeds.
Application:
Especially for milling aluminium and non-ferrous metals.
Note:
hmax: The values stated in the table are maximum values.
aemax = 0.15×D for TPC machining.
aemax = 0.15×D for TPC machining.