{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide mini milling cutter 0,8 mm
Article no.: 202262 0,8
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 0.8 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | |
| Shank | Parallel shank to h6 | |
| Through-coolant | no | |
| Flute length Lc | 2 mm | |
| Overall length L | 38 mm | |
| Shank ⌀ Ds | 3 mm | |
| Shank form | HA | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.003 mm | |
| Feed fz for side milling in steel < 750 N/mm2 | 0.003 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202262 0,8 | |
| EAN / GTIN | 4045197863942 | |
| Manufacturer number | 202262 0,8 |
Application Table
N
170
N
140
N
100
P
70
P
60
P
45
M
40
K
55
Description
Version:
Shank similar to DIN 6535 HB.
Save on regrinding costs:
It is cheaper to use solid carbide mini milling cutters to the wear limit than to regrind them.
Save on regrinding costs:
It is cheaper to use solid carbide mini milling cutters to the wear limit than to regrind them.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide mini milling cutter 0,8 mm
on request
In stock
348 pieces in stock
US $ 17.86
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
296 pieces in stock
US $ 20.39
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
244 pieces in stock
US $ 20.39
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | without | without | without |
| Overall length L | 38 | 38 | 38 |
| Shank form | HA | HA | HA |
| Cutting edge ⌀ DC | 0.8 | 0.8 | 0.8 |
| No. of teeth Z | 3 | 3 | 3 |
| Shank ⌀ Ds | 3 | 3 | 3 |
| Type of product | End / face mill | End / face mill | End / face mill |