{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Roughing end mill HSS-PM 14 mm
Article no.: 192860 14
Article code:
- Tool material: HSS PM
- Standard: DIN 844
- Milling profile: HR
- Tolerance nominal ⌀: ±0.12
- No. of teeth Z: 5
Product details
Technical Data
| Cutting edge ⌀ DC | 14 mm | |
| Coating | TiAlN | |
| Tool material | HSS PM | |
| Standard | DIN 844 | |
| Milling profile | HR | |
| Tolerance nominal ⌀ | ±0.12 | |
| No. of teeth Z | 5 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 26 mm | |
| Overall length L | 83 mm | |
| Shank ⌀ Ds | 12 mm | |
| Corner chamfer width at 45° | 0.3 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.033 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192860 14 | |
| EAN / GTIN | 4045197108500 | |
| Manufacturer number | 192860 14 |
Application Table
N
138
P
83
P
64
P
64
P
37
P
32
M
23
M
18
K
55
N
110
Description
Version:
Relief ground fine pitch knuckle form profile.
Centre cutting teeth for plunging.
Size 6M to 25M − MID mills: Dimensions to manufacturer’s standard,which is between DIN 844 stub and DIN 844 long.
Centre cutting teeth for plunging.
Size 6M to 25M − MID mills: Dimensions to manufacturer’s standard,which is between DIN 844 stub and DIN 844 long.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Roughing end mill HSS-PM 14 mm
on request
In stock
83 pieces in stock
US $ 97.67
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
37 pieces in stock
US $ 88.81
plus VAT at the current rate
Prices plus delivery costs
|
|
| Milling profile | HR | HR |
| Overall length L | 83 | 83 |
| Standard | DIN 844 | DIN 844 |
| Helix angle | 30 | 30 |
| Tolerance nominal ⌀ | ±0.12 | k12 |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.033 | 0.033 |
| Corner chamfer width at 45° | 0.3 | 0.3 |