{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide drill plain shank DIN 6535 HA 11,2
Article no.: 122771 11,2
Article code:
- Tool material: Solid carbide
- Standard: DIN 6537
- Version: 6×D
- Tolerance nominal ⌀: m7
- Number of cutting edges Z: 2
Product details
Technical Data
| Nominal ⌀ DC | 11.2 mm | |
| Coating | AlTiN-Si | |
| Tool material | Solid carbide | |
| Standard | DIN 6537 | |
| Version | 6×D | |
| Tolerance nominal ⌀ | m7 | |
| Number of cutting edges Z | 2 | |
| Point angle | 140 degrees | |
| recommended maximum drilling depth L2 | 54.2 mm | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 71 mm | |
| Overall length L | 118 mm | |
| Shank ⌀ Ds | 12 mm | |
| Feed f in steel < 900 N/mm2 | 0.2 mm/rev. | |
| Colour ring | green | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 122771 11,2 | |
| EAN / GTIN | 4062406148188 | |
| Manufacturer number | 122771 11,2 |
Application Table
N
200
N
160
P
110
P
90
P
80
P
70
P
60
K
90
K
60
Description
Version:
Tool specially matched to drilling holes without through-coolant. Concave major cutting edges and a special flute profile ensure a good chip evacuation. The sturdy cutter geometry with special point geometry and 4 cutting edges ensures drilling with good process reliability. A wide range of applications in steel materials thanks to a combination of tough ultra-fine grain carbide and extremely wear-resistant and heat-resistant coating.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide drill plain shank DIN 6535 HA 11,2
on request
In stock
69 pieces in stock
US $ 66.48
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
22 pieces in stock
£101.64
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
8 pieces in stock
£63.80
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | AlTiN-Si | TiN | uncoated |
| Colour ring | green | without | without |
| Nominal ⌀ DC | 11.2 | 11.2 | 11.2 |
| Shank | DIN 6535 HA to h6 | Parallel shank to h7 | Parallel shank to h7 |
| Tool material | Solid carbide | Solid carbide | Solid carbide |
| recommended maximum drilling depth L2 | 54.2 | 30.2 | 30.2 |
| Type of product | Jobber drill | Jobber drill | Jobber drill |