{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master TM end cutting thread mill 2.5×D M3
Article no.: 139526 M3
Article code:
- Thread type: M; M-LH
- Flank angle: 60
- Tool material: Solid carbide
- Thread standard: DIN 13
- Shank: DIN 6535 HA to h6
Product details
Technical Data
| Thread size | M3 | |
| Coating | AlCrN | |
| Thread type | M; M-LH | |
| Flank angle | 60 degrees | |
| Tool material | Solid carbide | |
| Thread standard | DIN 13 | |
| Shank | DIN 6535 HA to h6 | |
| Number of cutting edges Z | 4 | |
| Through-coolant | yes | |
| Application for type of drilling | up to 2.5×D for blind holes; up to 2.5×D for through holes | |
| Cutting direction | left-hand | |
| Spacing of the cutters | unequal spacing | |
| Thread pitch | 0.5 mm | |
| Cutting edge ⌀ DC | 2.33 mm | |
| Cutter length lc | 1 mm | |
| Overhang L1 | 8 mm | |
| Shank length Ls | 36 mm | |
| Overall length L | 58 mm | |
| Shank ⌀ Ds | 6 mm | |
| Neck ⌀ D1 | 1.65 mm | |
| Programming radius | 1.135 mm | |
| Feed fz in steel < 750 N/mm2 | 0.015 mm | |
| Shank tolerance | h6 | |
| Number of clamping slots | 4 | |
| Colour ring | green | |
| Internal/external application | Internal | |
| Thread depth | 7.5 | |
| Series | Master TM | |
| Type of product | Drill thread milling cutters |
Identification numbers & Classifications
| Article number | 139526 M3 | |
| EAN / GTIN | 4067263290612 |
Application Table
N
220
N
220
N
180
P
140
P
130
P
120
P
90
P
80
H
85
H
50
M
82
M
75
S
50
K
120
N
200
Description
Version:
- Significantly reduced vibrations due to irregular cutting edge spacing.
- New coating for optimum wear resistance.
- Cooling grooves on the shank for targeted coolant feed.
- Corrected thread profile for avoidance of profile distortions.
The special front cutter geometry with unequal spacing permits process-reliable circular thread milling across a wide spectrum of materials. The side cooling grooves on the shank ensure outstanding coolant feed without weakening the tool core and thus offer maximum process reliability even in unstable conditions. All tools have left-hand cutting and are suitable for right-hand and left-hand threads.