{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
DUO-LOCK HAIMER MILL Power Series TPC 16 mm
Article no.: 220327 16
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Helix angle: 46
- Helix angle characteristic: unequal spacing
Product details
Technical Data
| Coating | AlTiN | |
| Cutter ⌀ D | 16 mm | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | h9 | |
| Number of cutting edges Z | 5 | |
| Helix angle | 46 degrees | |
| Helix angle characteristic | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.05×D | |
| Machining strategy | TPC | |
| Through-coolant | no | |
| suitable arbor | with threaded shank | |
| Flute length L2 | 48 mm | |
| ⌀ D2 | 15.5 mm | |
| Overhang L1 | 48 mm | |
| Overall length L | 56 mm | |
| DUO-LOCK interface | DL16 | |
| Width across flats AF | 13 mm | |
| recommended tightening torque | 60 Nm | |
| Corner chamfer width at 45° | 0.5 mm | |
| Corner chamfer angle | 45 degrees | |
| Average chip thickness hmax for TPC milling in steel < 900 N/mm2 | 0.035 mm | |
| Type of product | Cutter insert for milling |
Identification numbers & Classifications
| Article number | 220327 16 | |
| EAN / GTIN | 4034221103222 | |
| Manufacturer number | DL16F1105LL1600CDA |
Application Table
N
700
N
700
N
235
P
220
P
180
P
160
P
120
M
80
S
30
K
130
Description
Version:
DUO-LOCK HAIMER MILL: Can be used as a universal tool. Unique end face geometry for ramping and circular interpolation milling. First choice for applications with short overhangs. DUO-LOCK HAIMER MILL Power Series: First choice for applications with long overhangs and unstable clamping conditions. For particularly smooth running on long overhangs it is preferable to use solid carbide extensions.
Note:
hmax: The values stated in the table are maximum values.
aemax = 0.05 × D for TPC machining.
aemax = 0.05 × D for TPC machining.