{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine tap HSS-E Form C G1
Article no.: 137450 G1
Article code:
- Thread type: G
- Flank angle: 55
- Tool material: HSS
- Standard: DIN 5156
- Taper lead form: C
Product details
Technical Data
| Thread size | G1 | |
| Coating | vaporised | |
| Thread type | G | |
| Flank angle | 55 degrees | |
| Tool material | HSS | |
| Standard | DIN 5156 | |
| Taper lead form | C | |
| Helix angle | 40 degrees | |
| Shank | Plain shank with h9 | |
| Through-coolant | no | |
| Application for type of drilling | up to 2×D for blind holes | |
| Cutting direction | right-hand | |
| Thread pitch | 2.309 mm | |
| Threads per inch | 11 | |
| Thread ⌀ | 33.25 mm | |
| Overall length L | 160 mm | |
| Shank ⌀ Ds | 25 mm | |
| Shank square □ | 20 mm | |
| Tapping hole ⌀ | 30.75 mm | |
| Type of threading tool | Machine tap for dynamic machining | |
| Number of clamping slots | 4 | |
| Colour ring | blue | |
| Number of cutting edges Z | 4 | |
| Thread depth | 66.5 mm | |
| Type of product | Tap |
Identification numbers & Classifications
| Article number | 137450 G1 | |
| EAN / GTIN | 4045197079992 | |
| Manufacturer number | 137450 G1 |
Application Table
N
13
P
15
P
15
P
15
M
6
N
13
Description
Version:
Surface vaporised for reduced edge build-up.
HSS
Application:
For Whitworth parallel pipe threads DIN-ISO 228/1 (threads that do not form a seal within the connection).
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Machine tap HSS-E Form C G1 |
||
| Threads per inch | 11 | 11 |
| Thread size | G1 | G1 |
| Thread pitch | 2.309 | 2.309 |
| Standard | DIN 5156 | DIN 5156 |
| Shank square □ | 20 | 20 |
| Helix angle | 40 | 40 |
| Application for type of drilling | up to 2×D for blind holes | up to 2.5×D for blind holes |