{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Alu SlotMachine solid carbide roughing end mill HPC, DLC, ⌀ e8 DC: 6mm
Article no.: 205250 6
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Milling profile: WR
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Series | Master Alu | |
| Cutting edge ⌀ DC | 6 mm | |
| Coating | DLC | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Milling profile | WR | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 35 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.4×D for side milling; Full slot cutting depth 1×D | |
| Shank | DIN 6535 HA to h6 | |
| Balance quality with shank | G 2.5 with HA | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 13 mm | |
| Overhang length L1 incl. recess | 19 mm | |
| Recess ⌀ D1 | 5.5 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner rounding rv | 0.2 mm | |
| Feed fz for slot milling in short-chipping aluminium | 0.08 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.1 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 205250 6 | |
| EAN / GTIN | 4062406122218 | |
| Manufacturer number | 205250 6 |
Application Table
N
450
N
400
N
380
N
120
N
100
N
160
N
200
Description
Version:
For roughing.
Special profile for machining non-ferrous metals.
Special profile for machining non-ferrous metals.
Advantage:
Optimised flute form, eccentric relief ground, generous chip spaces.
Up to 2 × D into solid material at very high feed rates and smooth cutting action.
Ramping capability up to 45°.
Very high feed rates when plunging vertically, thanks to special plunging geometry.
Up to 2 × D into solid material at very high feed rates and smooth cutting action.
Ramping capability up to 45°.
Very high feed rates when plunging vertically, thanks to special plunging geometry.
Note:
For HB shanks use order no. 205251.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||||
|---|---|---|---|---|---|---|---|
GARANT Master Alu SlotMachine solid carbide roughing end mill HPC, DLC, ⌀ e8 DC: 6mm
on request
In stock
241 pieces in stock
82,11 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
189 pieces in stock
45,43 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
74 pieces in stock
62,33 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
107 pieces in stock
71,53 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
24 pieces in stock
67,85 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
236 pieces in stock
98,44 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
100 pieces in stock
38,18 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overhang length L1 incl. recess | 19 mm | 21 mm | 21 mm | 20 mm | 19 mm | 19 mm | 19 mm |
| Colour ring | yellow | yellow | yellow | pink | pink | yellow | yellow |
| Overall length L | 57 mm | 57 mm | 57 mm | 57 mm | 57 mm | 57 mm | 57 mm |
| Standard | DIN 6527 | Manufacturer’s standard | Manufacturer’s standard | DIN 6527 | Manufacturer’s standard | DIN 6527 | DIN 6527 |
| Cutting edge ⌀ DC | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm |
| Tool material | Solid carbide | Solid carbide | solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
| Helix angle | 35 degrees | 30 degrees | 30 degrees | 40 degrees | 40 degrees | 35 degrees | 45 degrees |