{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Angle bender complete with standard accessories 100 mm
Article no.: 823650 100
Article code:
Click to enlarge image
Click to enlarge image
Tightest bending capability at full bending performance.
Click to enlarge image
Tightest bending capability at full bending performance.
Click to enlarge image
Tightest bending capability at reduced bending performance, i.e. when bending in the upper hollowed part of the bending jaw and pressure pad.
Click to enlarge image
Tightest bending capability at reduced bending performance, i.e. when bending in the upper hollowed part of the bending jaw and pressure pad.
Click to enlarge image
Product details
Technical Data
| Width | 210 mm | |
| Depth | 175 mm | |
| Height | 260 mm | |
| for bending height up to | 100 mm | |
| Weight including accessories | 24 kg | |
| Type of product | Bending machine |
Identification numbers & Classifications
| Article number | 823650 100 | |
| EAN / GTIN | 2050001931306 | |
| Manufacturer number | 600000 |
Description
Version:
Equipment of unbreakable spheroidal graphite iron with eccentric quick clamping for cold bending and hot bending flat, round and rectangular steel bar to high accuracy - for continuous use to professional standards. Suitable for bending and cranking to particularly tight radii.
Application:
For accurate hot and cold bending (bending angles 0 −120°) of flat, round and square material. For producing sharp bends or rounded bends in various radii. Length stop and angle stop for ease of setting.
Maximum bending performance:
Maximum bending performance:
- (reduced) with bending plates No. 823652 / 823653 within the upper hollowed area of the jaw:
− Steel flat, hot, up to 50×6 mm or 20×15 mm;
− Steel flat, cold, up to 50×4 mm or 20×10 mm;
− Round and square steel bar, cold, up to 16 mm. - (normal) with bending plates No. 823652 / 823653 within the lower non-hollowed area of jaw:
− Steel flat, hot, up to 100×12 mm or 60×20 mm;
− Steel flat, cold, up to 100×6 mm or 50×12 mm;
− Round and square steel bar, hot, up to 30 mm;
− Round and square steel bar, cold, up to 18 mm. - (maximum) with bending plates No. 823654 / 823655 (special accessory):
− Steel angle section, hot, (straight) up to 100×12 mm;
− Steel angle section, cold, (straight) up to 60×8 mm;
− Copper strip up to 100×12 mm;
− Stainless steel up to 50×8 mm.
Supplied with:
Angle bender including:
1 clamping box with eccentric clamping,
1 bending plate sharp-edged (for material up to 2 mm) No. 823652,
1 normal bending plate (r = 4 mm) No. 823653, 1 pressure pad
1 length stop 440 mm,
1 angle stop.
1 clamping box with eccentric clamping,
1 bending plate sharp-edged (for material up to 2 mm) No. 823652,
1 normal bending plate (r = 4 mm) No. 823653, 1 pressure pad
1 length stop 440 mm,
1 angle stop.