{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Lightweight revolving lathe centre 3
Article no.: 320675 3
Article code:
Product details
Technical Data
| Morse taper | MT3 | |
| Body ⌀ D | 50 mm | |
| Overall length L | 151 mm | |
| Reach B | 70 mm | |
| largest centre point ⌀ 60° A | 22 mm | |
| maximum radial run-out | 0.005 mm | |
| Centre point length C | 27.5 mm | |
| maximum speed | 6,300 min-1 | |
| for workpiece weight | 400 kg | |
| Type of product | Centring drill |
Identification numbers & Classifications
| Article number | 320675 3 | |
| EAN / GTIN | 5907412202754 | |
| Manufacturer number | 800006623 |
Description
Version:
- Point angle 60°.
- Lightweight version, maintenance-free.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
For roughing and precision turning on lathes.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Lightweight revolving lathe centre 3
on request
In stock
2 pieces in stock
€265.65
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
9 pieces in stock
€1,124.70
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
4 pieces in stock
€476.10
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
29 pieces in stock
€874.00
plus VAT at the current rate
Prices plus delivery costs
|
|
| for workpiece weight | 400 | 400 | 1,000 | 400 |
| Body ⌀ D | 50 | 30 | 60 | |
| maximum speed | 6,300 | 12,000 | 5,000 | 4,300 |
| maximum radial run-out | 0.005 | 0.005 | 0.005 | 0.005 |
| Morse taper | MT3 | MT3 | MT3 | MT3 |
| Reach B | 70 | 68 | 95 | |
| Type of product | Centring drill | Centring drill | Centring drill | Centring drill |