{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine reamer H7, uncoated, Nominal ⌀ DC: 40mm
Article no.: 164000 40
Article code:
- Tolerance: H7
- Tool material: HSS E
- Standard: DIN 208 B
- Helix angle: 7-8
- Through-coolant: no
Product details
Technical Data
| Nominal ⌀ DC | 40 mm | |
| Coating | uncoated | |
| Tolerance | H7 | |
| Tool material | HSS E | |
| Standard | DIN 208 B | |
| Helix angle | 7-8 degrees | |
| Through-coolant | no | |
| Shank | Morse taper | |
| Application for type of drilling | for through hole | |
| Flute length Lc | 81 mm | |
| Overhang L1 | 204 mm | |
| Overall length L | 329 mm | |
| Number of cutting edges Z | 10 | |
| Morse taper MT size | 4 | |
| Feed f in steel < 750 N/mm2 | 0.35 mm/rev. | |
| Reaming oversize in diameter | 0.3 mm - 0.5 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 164000 40 | |
| EAN / GTIN | 4045197092090 | |
| Manufacturer number | 164000 40 |
Application Table
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Description
Version:
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Reamers finish ground for fit H7.
Reamers finish ground for fit H7.
Application:
For reaming through holes, as the chips are evacuated in the cutting direction. Also suitable for blind holes due to the short chamfer lead.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Machine reamer H7, uncoated, Nominal ⌀ DC: 40mm
on request
In stock
45 pieces in stock
BGN 546.55
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 1-2 weeks
0 pieces in stock
BGN 843.44
plus VAT at the current rate
Prices plus delivery costs
|
on request
Available in 3-4 weeks
0 pieces in stock
BGN 798.46
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
42 pieces in stock
BGN 620.77
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 10 | 10 | 10 | 10 |
| Overhang L1 | 204 mm | 204 mm | 190 mm | 190 mm |
| Colour ring | without | without | without | without |
| Overall length L | 329 mm | 329 mm | 305 mm | 305 mm |
| Nominal ⌀ DC | 40 mm | 40 mm | 40 mm | 40 mm |
| Standard | DIN 208 B | DIN 208 B | DIN 206 B | DIN 206 B |
| Flute length Lc | 81 mm | 81 mm | 152 mm | 152 mm |