{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Torque screwdrivers with digital display, to take interchangeable blades, maximum torque: 250cNm
Article no.: 659911 250
Article code:
- Direction of tightening: Right-hand tightening
- Torque measuring accuracy: ±6
- Test certificate: Manufacturer’s test certificate
Product details
Technical Data
| maximum torque | 250 cNm | |
| Direction of tightening | Right-hand tightening | |
| Torque measuring accuracy | ±6 % | |
| Test certificate | Manufacturer’s test certificate | |
| Overall length L | 122 mm | |
| Torque range | 40 cNm - 250 cNm | |
| Torque range | 0.4 Nm - 2.5 Nm | |
| Resolution | 2 cNm | |
| ⌀ | 35 mm | |
| suitable interchangeable blades | 6 mm | |
| Display | digital | |
| Connection format | exchangeable blade | |
| Data can be recorded | no | |
| Setting the trigger value | preset | |
| Adjustable trigger value | adjustable | |
| Number of batteries contained | 1 | |
| Article no of the battery / rechargeable battery fitted | CR1225 | |
| Type of product | Torque screwdriver |
Identification & Classification
| Article number | 659911 250 | |
| EAN / GTIN | 7610733249626 | |
| Manufacturer number | 8320.A 0,4-2,5 |
Description
Version:
Power grip with comfortable easy-grip Haptoprene surface allows transmission of the required torque with no problems even with wet or oily hands. On reaching the set torque value, the screwdriver can be felt and heard to trigger and is then again immediately ready for use. The release torque is higher than the tightening torque (overload protection).
The desired torque for sizes 80, 250 and 500 is set using a 3 AF hexagon screwdriver, and 4 AF for size1600. The torque setting is displayed in a window (digital display at the end of the handle). Activation of the digital display by pressing with a finger (pressure sensor). The automatic cut-out after approx. 20 seconds enables a battery life of more than 10years. The battery can be changed at the factory or during recalibration. Display changeover between Nm and lbf. ft.
To take interchangeable blades (8 mm No. 659870 − 659884 and 6 mm No. 659920 − 659928).
The desired torque for sizes 80, 250 and 500 is set using a 3 AF hexagon screwdriver, and 4 AF for size1600. The torque setting is displayed in a window (digital display at the end of the handle). Activation of the digital display by pressing with a finger (pressure sensor). The automatic cut-out after approx. 20 seconds enables a battery life of more than 10years. The battery can be changed at the factory or during recalibration. Display changeover between Nm and lbf. ft.
To take interchangeable blades (8 mm No. 659870 − 659884 and 6 mm No. 659920 − 659928).
Application:
For controlled tightening of screws to a pre-set torque.
Standard:
Tested to DIN EN ISO 6789.
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.