{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
KOMET KUB Trigon® indexable drill ABS 50, 3×D, ⌀ DC: 41mm
Article no.: 236635 41
Article code:
- Drill depth for indexable insert drill up to: 3×D
- Shank: ABS
- Use for drilling: Centre drilling; limited cross-drilling; oblique spot drilling; limited cross-drilling; Aperture; oblique exit; convex
- Through-coolant: yes
Product details
Technical Data
| Series | KUB Trigron® | |
| Nominal ⌀ D | 41 | |
| Drill depth for indexable insert drill up to | 3×D | |
| Shank | ABS | |
| Use for drilling | Centre drilling; limited cross-drilling; oblique spot drilling; limited cross-drilling; Aperture; oblique exit; convex | |
| Through-coolant | yes | |
| Reach L1 | 123 mm | |
| Overhang LA | 173 mm | |
| ABS® shank ⌀ Ds | 50 mm | |
| achievable maximum ⌀ offset | 44 mm | |
| Maximum adjustment limit Vmax | 1.5 mm | |
| ISO code indexable insert | WOEX 06T304 34-... | |
| Pack of insert screws | 239652 10IP1 (2.8 Nm) | |
| Number of cutting edges Z | 1 | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Article number | 236635 41 | |
| EAN / GTIN | 4047109099845 | |
| Manufacturer number | V30 74101 |
Description
Version:
- Special manufacturing procedure for extremely large flutes with very high rigidity.
- Specific positioning of the indexable inserts for bores free of withdrawal marks and with precise dimensional stability(± 0.1 mm as a rule).
- Internal coolant supply is directed to the cutting edges (sophisticated geometry, ideal for minimum lubrication).
- 3 − 10 bar coolant pressure is sufficient.
- For stationary and rotating applications.
- Offset-axis drilling: dependent on ⌀ up to 1.5 mm.
Application:
Supplied with:
Clamp screws (without indexable inserts).
Note:
- Note! A disc falls off when the drill exits. Risk of injury if the component is rotating! Please take safety precautions.
- On request − left-hand cutting; − 2×D, − other ⌀; − special types − torsional vibration damper for ABS giving low-vibration machining, with maximum tool life and minimum noise level.