{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide mini milling cutter 0,6 mm
Article no.: 202266 0,6
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 0.6 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; Full slot cutting depth 1×D | |
| Shank | Parallel shank to h6 | |
| Through-coolant | no | |
| Flute length Lc | 1.5 mm | |
| Overall length L | 38 mm | |
| Shank ⌀ Ds | 3 mm | |
| Shank form | HA | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.003 mm | |
| Feed fz for side milling in steel < 750 N/mm2 | 0.003 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202266 0,6 | |
| EAN / GTIN | 4045197864598 | |
| Manufacturer number | 202266 0,6 |
Application Table
N
170
N
140
N
100
P
70
P
60
P
45
M
40
K
55
Description
Version:
Shank similar to DIN 6535 HB.
Save on regrinding costs:
It is cheaper to use solid carbide mini milling cutters to the wear limit than to regrind them.
Save on regrinding costs:
It is cheaper to use solid carbide mini milling cutters to the wear limit than to regrind them.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide mini milling cutter 0,6 mm
on request
Subsequent delivery
0 pieces in stock
US $ 17.86
plus VAT at the current rate
Prices plus delivery costs
|
on request
Delivery in 3 - 4 working days
2 pieces in stock
CHF 20.40
plus VAT at the current rate
Prices plus delivery costs
|
on request
Delivery in 3 - 4 working days
2 pieces in stock
CHF 23.30
plus VAT at the current rate
Prices plus delivery costs
|
|
| Bague de couleur | without | Sans | Vert |
| Longueur totale L | 38 | 38 | 38 |
| Norme | Manufacturer’s standard | Norme usine | Norme usine |
| Tolérance ⌀ nominal | e8 | h10 | e8 |
| Nombre de dents Z | 3 | 3 | 3 |
| Direction de l'approche | horizontal, oblique and vertical | Horizontal, oblique et vertical | Horizontal, oblique et vertical |
| Type de produit | End / face mill | Fraise à dresser | Fraise à dresser |