{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
High-precision solid carbide countersink with unequal spacing 90° 16,5 mm
Article no.: 150388 16,5
Article code:
- Countersink tip angle: 90
- Tool material: Solid carbide
- Spacing of the countersink cutting edges: unequal spacing
- Number of cutting edges Z: 3
- Standard: DIN 335 C
Product details
Technical Data
| External ⌀ | 16.5 mm | |
| Coating | TiAlN | |
| Countersink tip angle | 90 degrees | |
| Tool material | Solid carbide | |
| Spacing of the countersink cutting edges | unequal spacing | |
| Number of cutting edges Z | 3 | |
| Standard | DIN 335 C | |
| Shank | Plain shank with h6 | |
| Through-coolant | no | |
| smallest countersink ⌀ for holes from | 3.2 mm | |
| Overall length L | 60 mm | |
| Shank ⌀ Ds | 10 mm | |
| for countersunk screws DIN 7991 | M8 | |
| Feed f in steel < 1100 N/mm2 | 0.16 mm/rev. | |
| Colour ring | green | |
| Type of product | Stepped drill and countersink |
Identification numbers & Classifications
| Article number | 150388 16,5 | |
| EAN / GTIN | 4045197743794 | |
| Manufacturer number | 150388 16,5 |
Application Table
N
80
N
80
N
60
P
65
P
60
P
50
P
40
P
10
H
12
M
25
M
20
S
15
K
35
N
70
N
Description
Version:
All countersinks have 3 cutting edges. Special geometry with extremely unequal spacing and matching cutting edge preparation. Radially relief ground. Flutes ground from solid. Newly developed special TiAlN coating for long service life.
High-precision countersink, produced with tight manufacturing tolerances similar to DIN 335-C.
High-precision countersink, produced with tight manufacturing tolerances similar to DIN 335-C.
Advantage:
Very smooth cutting throughout the entire countersinking operation. Chatter-free running for perfect results and optimum tool service life.
Application:
High-precision countersinks for production of exactly round 90° countersunk surfaces.
Very well suited to virtually all materials. Advantage in comparison to HSS countersinks especially in the field of high-tensile steels and because the working life is several times longer. Shank tolerance h6 - suitable for mounting in hydraulic chucks or shrink-fit chucks.
Very well suited to virtually all materials. Advantage in comparison to HSS countersinks especially in the field of high-tensile steels and because the working life is several times longer. Shank tolerance h6 - suitable for mounting in hydraulic chucks or shrink-fit chucks.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
High-precision solid carbide countersink with unequal spacing 90° 16,5 mm
on request
In stock
50 pieces in stock
US $ 251.57
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
16 pieces in stock
US $ 67.87
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
76 pieces in stock
US $ 46.18
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | TiAlN | uncoated | uncoated |
| Colour ring | green | without | without |
| Overall length L | 60 | 85 | 85 |
| Through-coolant | no | no | no |
| Standard | DIN 335 C | DIN 335 D | DIN 335 D |
| Tool material | Solid carbide | HSS | HSS |
| Type of product | Stepped drill and countersink | Stepped drill and countersink | Stepped drill and countersink |