{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Hand reamer H7 14 mm
Article no.: 160150 14
Article code:
- Tolerance: H7
- Tool material: HSS
- Standard: DIN 206 B
- Helix angle: 7-8
- Application for type of drilling: for through hole
Product details
Technical Data
| Nominal ⌀ DC | 14 mm | |
| Tolerance | H7 | |
| Tool material | HSS | |
| Standard | DIN 206 B | |
| Helix angle | 7-8 degrees | |
| Application for type of drilling | for through hole | |
| Flute length Lc | 81 mm | |
| Overhang L1 | 101 mm | |
| Overall length L | 163 mm | |
| Number of cutting edges Z | 8 | |
| Shank square □ | 11.2 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 160150 14 | |
| EAN / GTIN | 4045197937285 | |
| Manufacturer number | 160150 14 |
Application Table
N
P
P
P
Description
Version:
With left-hand helix 7 − 8° and long taper lead, more than 1/5 of the cutting length. An even number of teeth with irregular spacing for accurately round holes, free of chatter. The cylindrical ground chamfer on the plain cutting section smooths the hole and guides the reamer.
Application:
For through holes (not for blind holes). Also very suitable for interrupted holes.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Hand reamer H7 14 mm |
||
| Number of cutting edges Z | 8 | 6 |
| Overhang L1 | 101 | 109 |
| Colour ring | without | without |
| Overall length L | 163 | 160 |
| Flute length Lc | 81 | 47 |
| Tolerance | H7 | H7 |
| Type of product | Phillips bit | Phillips bit |