{{ name }}
Artikl br. {{ combinedCodeWithHighlight }}
Šifra artikla:
EAN / GTIN:
Broj proizvođača:
HiPer-Drill base body 22 mm
Artikl br.: 231605 22
Šifra artikla:
- izvedba: 3×D
- Drška: ISO 9766
- Primjena bušilice: uvjetovano poprečno bušenje; uvjetovano paketno bušenje; uvjetovano ukošeni izlaz; uvjetovano koso bušenje
- Unutarnje hlađenje: da
Pojedinosti o proizvodu
Tehnički podaci
| Serija | HiPer-Drill | |
| izvedba | 3×D | |
| Drška | ISO 9766 | |
| Primjena bušilice | uvjetovano poprečno bušenje; uvjetovano paketno bušenje; uvjetovano ukošeni izlaz; uvjetovano koso bušenje | |
| Broj oštrica Z | 2 | |
| Unutarnje hlađenje | da | |
| ⌀ područja Dc | 22 mm - 22,99 mm | |
| Korisna duljina L1 | 69 mm | |
| ⌀ drške Ds | 25 mm | |
| Duljina drške Ls | 56 mm | |
| Stezni vijak | 231999 10IP (3,3 Nm) | |
| Ukupna duljina L | 159 mm | |
| Vrsta proizvoda | Bušilica za izmjenjive pločice |
Identifikacijski brojevi i klasifikacije
| Broj artikla | 231605 22 | |
| EAN / GTIN | 4045197602831 |
Opis
Version:
- Very high feed rates and maximum performance due to optimally matched geometries and materials.
- Precise positioning of the cutter insert due to Vee insert seating and secure clamping by the centre bore.
- High concentricity when assembled. (For holes up to IT9 accuracy)
- Shank support for optimum stability in operation.
Application:
For stationary and rotating use. For holes up to IT9 accuracy.
Note:
The insert screw must be replaced after every fifth change of cutter insert.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.