{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HOLEX Pro cutting disc EXTRA THIN 125
Article no.: GG5355 125
Article code:
- Grinding medium code: A
- Iron, sulphur and chlorine constituents: < 0.1
- Shape description: flat
- Bore ⌀: 22.23
- recommended approach angle: 90
Product details
Technical Data
| Grinding medium code | A | |
| Specification | A60P-BF | |
| Iron, sulphur and chlorine constituents | < 0.1 % | |
| Shape | 41 | |
| Shape description | flat | |
| Disc ⌀ | 125 mm | |
| Disc thickness | 1 mm | |
| Contents | 100 | |
| Bore ⌀ | 22.23 mm | |
| for material thicknesses | 3 mm - 5 mm | |
| recommended approach angle | 90 degrees | |
| optimised for material | Steel | |
| Propulsive equipment | Angle grinders | |
| maximum circumferential speed | 80 m/s | |
| maximum speed | 12,200 min-1 | |
| Type of product | Cutting disc |
Identification numbers & Classifications
| Article number | GG5355 125 | |
| EAN / GTIN | 4045197191854 | |
| Manufacturer number | GG5355 125 |
Application Table
Description
Version:
Open homogeneous structure; low odour grinding; glass fibre reinforcing fabric for maximum work safety; cool grinding; bore ⌀ 22.23 mm. The iron, sulphur and chlorine content are less than 0.1 %, making them suitable for working stainless steels (INOX). For use on electric and pneumatic angle grinders.
The thin cutting disc for quick cuts without heavy force.
such as 563550.
- Grit, bonding, abrasive additives as well as reinforcement of the cut-off discs are optimised for maximum cutting performance and working life in their respective applications.
- Thin cutting discs (0.8 mm / 1.0 mm / 1.6 mm) are specially suited for quick burr-free cutting with low thermal stress. On older angle grinders please ensure the discs are precisely clamped. Cutting discs from 2.0 mm disc thickness exhibit increased lateral stability, stiffness and service life.
- Shapes: Cutting discs flat (shape 41) or with depressed centre (shape 42).
The thin cutting disc for quick cuts without heavy force.
such as 563550.
Application:
For freehand cutting using electric and pneumatic angle grinders with maximum 80 m/s peripheral cutting speed vc.
Specification:
A60P-BF (same as 563550) for STAINLESS STEEL.
Note:
The disc thickness should be at least 20% of the material thickness to be cut. For stainless steel, use cutting discs at reduced speed.
Only sold in bulk pack quantities, not supplied individually. Ordering information: 1 set = 1 drum.
Only sold in bulk pack quantities, not supplied individually. Ordering information: 1 set = 1 drum.