{{ name }}
Tuote nro. {{ combinedCodeWithHighlight }}
Tuotekoodi:
EAN / GTIN:
Valmistajan numero:
GARANT Softcut kulmajyrsin 90° MTC pitkä 12/2L mm
Tuote nro.: 215609 12/2L
Tuotekoodi:
vartenAPMT 060202 ER INOX
- Setting angle κ: 90
- Milling application: Circular milling; Ramping; End milling
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Machining strategy: MTC
Tuotetiedot
Tekniset tiedot
| Series | Softcut® | |
| Cutting edge ⌀ DC | 12 mm | |
| Number of cutting edges Z | 2 | |
| Shank type | Plain shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Circular milling; Ramping; End milling | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Tool exchange | PowerCard | |
| Overhang L1 | 20 mm | |
| Overall length Ltot | 120 mm | |
| Shank ⌀ Ds h6 | 10 mm | |
| ⌀ D3 | 10 mm | |
| Circular interpolation milling ⌀ Dmin | 22 mm | |
| Circular interpolation milling ⌀ Dmax | 22 mm | |
| Circular interpolation milling ap | 0.8 mm | |
| Ramping angle αmax | 1.29 degrees | |
| Ramping length L for αmax | 8.85 mm | |
| suitable indexable insert | AP.. 0602.. | |
| Pack of insert screws | 219827 (6IP; 0.45 Nm) | |
| Type of product | End / face mill |
Tunnistenumerot ja Luokitukset
| Tuotekoodi | 215609 12/2L | |
| EAN / GTIN | 4045197409782 | |
| Valmistajan numero | 215609 12/2L |
Kuvaus
Version:
High precision indexable shoulder mill with irregular pitch for very smooth cutting, very high precision and very high metal removal rate. New generation of high performance indexable shoulder mills with special geometry for reduced cutting forces for MTC applications under unstable conditions or for spindles with low drive power. Suitable inserts APMT 0602..
Application:
For shoulder milling to large depths, also slotting. General use in all steels including stainless and acid-resistant steels.
Spare part:
Pack of insert screws No. 219827 (6IP; 0.45 Nm).