{{ name }}
Número de artículo {{ combinedCodeWithHighlight }}
Código del artículo:
EAN / GTIN:
Número del fabricante:
Solid carbide NC machine reamer 2 mm
Número de artículo: 164341 2
Código del artículo:
- Tolerance: H7
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Through-coolant: no
- Shank: DIN 6535 HA with h6
Detalles de producto
Datos técnicos
| Nominal ⌀ DC | 2 mm | |
| Coating | TiAlN | |
| Tolerance | H7 | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Through-coolant | no | |
| Shank | DIN 6535 HA with h6 | |
| Application for type of drilling | for through holes | |
| Flute length Lc | 12 mm | |
| Overhang L1 | 16 mm | |
| Overall length L | 50 mm | |
| Number of cutting edges Z | 4 | |
| Shank ⌀ Ds | 4 mm | |
| Feed f in steel < 1100 N/mm2 | 0.1 mm/rev. | |
| Reaming oversize in diameter | 0.05 mm - 0.1 mm | |
| Shank tolerance | h6 | |
| Colour ring | green | |
| Type of product | Phillips bit |
Números de identificación y clasificaciones
| Número de artículo | 164341 2 | |
| EAN / GTIN | 4045197464064 | |
| Número del fabricante | 164341 2 |
Tablas de Aplicación
N
35
N
30
N
25
P
30
P
25
P
20
P
15
P
10
M
15
M
12
S
10
K
10
N
25
Descripción
Version:
Version suitable for NC similar to DIN 8093 with straight shank ⌀ for standard chucking especially in hydraulic chucks or high precision collet chucks. This ensures the highest concentricity.
Tolerance specifications:
Size 0.6 – 0.9: Manufacturing or cutting edge tolerance 0/+0.004 mm.
Size 0.98 – 20: Reamer manufacturing or cutting edge tolerance to DIN1420 for H7 bore tolerance.
No need to procure special collets when using GARANT-NC reamers. With long flutes and left-hand helix.
Tolerance specifications:
Size 0.6 – 0.9: Manufacturing or cutting edge tolerance 0/+0.004 mm.
Size 0.98 – 20: Reamer manufacturing or cutting edge tolerance to DIN1420 for H7 bore tolerance.
No need to procure special collets when using GARANT-NC reamers. With long flutes and left-hand helix.
Application:
For reaming through holes, as the chips are evacuated in the cutting direction. Lead taper is suitable also for blind holes.