{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
- Milling head suitable for insert shape: round
- Milling application: Circular milling; Ramping
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 24 mm | |
| Number of cutting edges Z | 2 | |
| Shank type | with threaded shank | |
| Milling head suitable for insert shape | round | |
| Milling application | Circular milling; Ramping | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| ⌀ D1 h6 | 12.5 mm | |
| ⌀ D2 | 20.7 mm | |
| ⌀ D3 | 12 mm | |
| Overall length Ltot | 35 mm | |
| Mounting thread M | M12 | |
| Circular interpolation milling ⌀ Dmin | 36 mm | |
| Circular interpolation milling ⌀ Dmax | 46 mm | |
| Circular interpolation milling ap | 2.5 mm | |
| Ramping angle αmax | 5.37 degrees | |
| Ramping length L for αmax | 8.94 mm | |
| suitable indexable insert | RD..12T3 | |
| Pack of insert screws | 219805 (15IP; 3.8 Nm) | |
| Set of retaining screws | 219807 (15IP; 3.8 Nm) | |
| Type of product | Copy mill |
Identification numbers & Classifications
| Article number | 212155 24/2 | |
| EAN / GTIN | 4045197192844 | |
| Manufacturer number | 212155 24/2 |
Description
Version:
Milling body with irregular pitch for smooth cutting.
- High axial run-out accuracy and concentricity
- Stepless repositioning as the cutting edge wears.
Attention:
Retaining screws and retaining washers should not be used for inserts with positive geometry.